GENTEC® HP152 Series is a Single-Stage High Purity Brass Regulator designed for High Purity applications where occasional readjustment of the working pressure is acceptable.
Not recommended for corrosive gases.
Features
• 2” 316L Stainless Steel Diaphragm
• 2” Dual-Scale Pressure Gauges
• Optional outlet: Needle Valve or Diaphragm Valve
• Conforms to CGA E-4 standard for Gas Pressure Regulators
EX: HP152- | D | K | K - | C350 - | 01 - | NR |
Series | Inlet Pressure Range | Outlet Pressure Ranges | Gauge | Inlet Connections | Outlet Connections | Options |
HP152 | D: 3000 psig | G: 0-250 psig | K: psig/kPa | 00: 1/4” NPT(F) | 00: 1/4” NPT(F) | D: Diaphragm Valve |
H: 0-150 psig | P: psig/bar | C346: CGA346 | 01: 1/4” NPT(M) | N: Needle Valve | ||
I: 0-100 psig | W: No Gauge | C320: CGA320 | 10: 1/8” GENLOK | R: Relief Valve | ||
K: 0-50 psig | C510: CGA510 | 11: 1/4” GENLOK | ||||
M: 0-15 psig | C540: CGA540 | 12: 3/8” GENLOK | ||||
C580: CGA580 | 14B: 1/4” Hose Barb | |||||
C590: CGA590 | Other connections available | |||||
C326: CGA326 | ||||||
Other connections available | ||||||
F: 500 psig | H: 0-150 psig | K: psig/kPa | C510: CGA510 | Same as above | D: Diaphragm Valve | |
I: 0-100 psig | P: psig/bar | C300: CGA300 | N: Needle Valve | |||
K: 0-50 psig | W: No Gauge | Other connections available | R: Relief Valve | |||
M: 0-15 psig |
• Maximum inlet pressure: 3000 psig
• Maximum outlet pressure: 250 psig
• Operating temperature range: 0 to 140°F (-17 to 60°C)
• Weight: 3 lb 2 oz
• Body: Nickel-Plated Forged Brass
• Bonnet: Nickel-Plated Forged Brass
• Seat: PU
• Diaphragm: 316L Stainless Steel
• Adjusting Knob: ABS Plastic
• Calibration of Pressures Gauges & Test Equipment
• Supply of carrier gases for Gas Chromatography